2011 eXmark LZS29PKA604
$10,999.00 - Stock Number: DEMO
Lazer Z Propane Powered, Fully Loaded With All Kinds of Power, Including Staying Power
The Exmark Lazer Z X-Series is available with a 60” full-floating UltraCut™ Series 6 cutting decks allowing you to mow up to 8.4 acres per hour. The Lazer Z X-Series is powered by FX801V Kawasaki® V-Twin Propane engine allowing for speeds up to 11.5 mph. The Exmark Lazer Z S-Series is available with 60” or 72” full-floating UltraCut™ Series 4 cutting decks allowing you to mow up to 7.3 acres per hour. The Lazer Z S-Series is powered by FX801V Kawasaki® V-Twin Propane engines allowing speeds up to 10 mph.
Specifications
|
Engine
|
|
Air Filter
|
Heavy-duty canister air filtration system.
|
|
Drive
|
(System) Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavyduty components. 12 cc pumps and 14. 5 cubic inch motors.
|
|
Drive
|
(Wheel Release) Allows unit movement without engine running.
|
|
Engine
|
Kawasaki®
|
|
Fuel Capacity
|
High-capacity, 12-gallon, single fuel tank with single fill location.
|
|
Model
|
FX801V
|
|
Speed
|
Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.6 kmph) reverse.
|
|
Chassis
|
|
Caster Tires
|
.50" thick double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups.
|
|
Dimensions
|
|
Blade
|
3 Blades at 20.50" Length
|
|
Blade Tip Speed
|
Approximately 18,500 fpm.
|
|
Curb Weight
|
1316 lbs
|
|
Deck Width
|
60" (152.4 cm)
|
|
General Information
|
|
Cupholder
|
Standard.
|
|
Cutting Height
|
1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
|
|
Deck
|
(Style) Floating Deck
|
|
Deck Lift
|
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
|
|
Safety Systems
|
(Package) Operator Presence Controls (OPC) and drive system interlock.
|
|
Power Take-Off (PTO)
|
|
Engagement
|
(Rollover Protection System) 2-post foldable ROPS standard with seat belt and latch.
|
|
Engagement
|
MagStop electromagnetic 200-ft-lbs clutch with spot brake.
|
Features
All
-
Blade Spindles: No maintenance, sealed and non-greasable spindles. 5.40" diameter cutter housing with 1.75" diameter splined blade driver and 1.0" diameter spindle shaft.
-
Drive Tires: 23 x 9.5-12, Turf Master
-
Electrical: 12-volt battery with 15-amp alternator.
-
Front Caster Tires: 13 x 5.0-6; smooth-tread, semi-pneumatic.
-
Parking Brake: Lever-actuated disc and caliper.
-
Seat: High-back, bolstered seat with Elastomeric Vibration Control material.
-
Steering Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
-
Tractor Frame: Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
