Honda Power Equipment WB30

On Sale
$569.95
Was $669.95


New/Used
New
Availability
In Stock
Location
Brodner Equipment, Inc.
Title
Clean
Condition
Excellent
Manufacturer
Honda Power Equipment
Model
WB30

Overview

Description

Key Features
  • General purpose, centrifugal 3" pump
  • Easy starting Honda OHV commercial engine
  • 290 gal./min. capacity
  • Cast iron volute and impeller
  • Silicon carbide mechanical seal
Features
  • Easy starting Honda OHV commercial engine: The durable Honda GX series commercial grade engine is easy starting and provides ample power for the toughest conditions.
  • Durable silicon carbide mechanical seal: The WB30 features abrasion-resistant silicone-carbide seals for extended wear.
  • 4 vane high efficiency impeller: The WB20's exclusive, Honda-designed 4 vane impeller offers improved performance and high efficiency.
  • Cast iron volute: The rigid-mount cast iron volute reduces case wear, increasing the life of the pump.
  • Isolation mounted engine and pump: High performance mounts minimize vibration, keeping the pump from “walking" away or “burying" itself in soft soil conditions. The reduced vibration also reduces wear on components, increasing the pump's durability.
  • Heavy duty full frame protection: Protects the pump, while offering a convenient tie down location for transport.
  • Protected by Honda Oil Alert®: Protects the pump by shutting the engine off when low oil is detected.
  • 3 year residential/commercial warranty: You can rest easy, knowing your pump is covered from top to bottom for 3 full years.
  • Large strainer: The strainer allows up to 8 mm (5/16 in.) solids to pass through, helping to prevent clogging.
Specifications
  • Engine: GX160
  • Displacement: 163cc
  • Bore and stroke: 2.7 in. x 1.8 in.
  • Compression Ratio: 9.0:1
  • Oil Alert: Std
  • Pump type: Centrifugal, Self-priming
  • Volute: Rigid Mounted Cast Iron
  • Impeller: 4 Vane Cast Iron
  • Mechanical Seal (Pump case / impeller): Silicon Carbide/Silicon Carbide
  • Priming time: 150 sec @16.4 ft.
  • Drive system: Direct
  • Discharge capacity: 290 gpm
  • Suction port diameter: 3 in. NPT
  • Discharge port diameter: 3 in. NPT
  • Total head lift: 85 ft.
  • Suction head lift: 25 ft.
  • Maximum pressure: 37 psi
  • Dimensions (LxWxH): 20.1 in.x 15.2 in. x 17.9 in.
  • Solids handling: N/A
  • Dry weight: 57 lb.
  • Fuel Capacity: 0.82 gal.
  • Run Time @ Max Discharge: 1.9 hr
  • Strainer Part #: 78325-YG4-000
  • Residential Warranty: 3 years
  • Commercial Warranty: 3 years
Accessories
  • A wide variety of hose kits, couplers, adaptors, and other accessories are available.
NOTES:
WARNING: This product can expose you to chemicals including soots, tars, and mineral oils, which are known to the State of California to cause cancer, and carbon monoxide, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Specs

Engine

Engine Manufacturer
Honda
Engine Displacement
163cc
Bore and Stroke
2.7 in. x 1.8 in.

General

Pump Style
Centrifugal, Self-priming
Impeller
4 Vane Cast Iron
Drive System
Direct
Discharge Capacity
290 gpm
Discharge Port Diameter
3 in. NPT
Suction Diameter
3 in. NPT
Head Lift
85 ft.
Suction Head Lift
25 ft.
Max Pressure
37 psi
Weight
57 lb.

Promotions